JB/T 8135.4-1997 绕组线包装 第2部分: 圆柱形交货线盘 第3节: 热塑性材料非回收线盘
作者:标准资料网 时间:2024-05-25 04:05:49 浏览:8561
来源:标准资料网
基本信息
标准名称: | 绕组线包装 第2部分: 圆柱形交货线盘 第3节: 热塑性材料非回收线盘 |
中标分类: |
电工 >>
电工材料和通用零件 >>
带绝缘层电线 |
发布部门: | 全国电线电缆标准化技术委员会 |
发布日期: | 1997-09-05 |
实施日期: | 1998-01-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
归口单位: | 全国电线电缆标准化技术委员会 |
出版日期: | 1900-01-01 |
页数: | 3 页 |
批文号: | 机械科[1997]710号 |
适用范围
JB/T 8135.4-1997 本标准等效采用 IEC 264-2-3(1990)标准。 本标准规定了热塑性材料制成的非回收型圆柱形交货线盘的要求。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 电工 电工材料和通用零件 带绝缘层电线
基本信息
标准名称: | 链条 |
英文名称: | Chain |
中标分类: |
航空、航天 >>
航空器与航天器零部件 >>
机械配件、构件 |
替代情况: | HB 2-62-1994 |
发布日期: | 2003-02-24 |
实施日期: | 2003-02-24 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
出版日期: | 1900-01-01 |
页数: | 7页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 航空 航天 航空器与航天器零部件 机械配件 构件
Product Code:SAE AMS5529
Title:Steel, Corrosion Resistant, Sheet and Strip, 17Cr - 7.1Ni - 1.1Al, Solution Heat Treated and Cold Rolled, Precipitation Hardenable, 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.050 inch (0.038 to 1.27 mm) in nominal thickness.These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 600 °F (316 °C), but usage is not limited to such applications.Strength of these cold-worked products will be impaired if parts are welded during fabrication.ertain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.